Obsah fóra checksum.cz
Obsah fóra checksum.cz  »  Diesel  »  VW EDC16U1 2.0TDI BKD - flashing problems - please help
 Přidat nové téma   Zaslat odpověď
Strana 1 z 1    

VW EDC16U1 2.0TDI BKD - flashing problems - please help

Autor Zpráva
DeusViolentia
Zaslal: st listopad 25, 2009 19:30 pm Citovat
Založen: 25.11.2009 Příspěvky: 2
Hello @ all,

my Czech is not good, I hope you don´t mind if I write in english instead

I have a modified ori file from 2.0TDI BKD and want to flash it to the ECU with Superflash3 (SuperVAG).
The original file which I had read out is either *.BIN or a *.ECU file.

This file was modified and sent back to me as *.MOD file via e-mail.
The flash program does not accept *.MOD files, only BIN and ECU-files.
I don´t want to waste the ECU, so I got a few questions and hope someone could help me.

The MOD and BIN file has the same size, so I assume that the ending "MOD" is a binary and I just have to rename it?

I´ve tried that. Then the program tells me BOSCH informations (ECU number etc.) is missing.
There is a converter inside the Superflash BIN->ECU or ECU->BIN.
So I can convert the renamed BIN (former a MOD file) to ECU. Then a window pops up
and I can enter the "BOSCH" information (model, make, year, partnumber, number of firmware etc.)
Can I enter whatever I want? partnumber is 03G906016ET, but any other value is also accepted.
Would VAG-COM show "ABCDE" in the partnumber field afterwards if I would enter that here or should I strictly use the default values as seen in the ori file?

The last thing that confuses me is the different size of the ori ECU-file and modded ECU-file after conversion. They are about 280kB, but 5kB difference between both....

Lots of (basic) questions, hope you can help me!

Thanks very much!
Zobrazit informace o autorovi Odeslat soukromou zprávu
Brouk
Zaslal: st listopad 25, 2009 20:16 pm Citovat
Založen: 1.4.2007 Příspěvky: 1730 Bydliště: Vysočina- Telč
contact me ICQ 319193870

BR

_________________
upravy software , "pro stale zakazniky" full HW-SW podpora vcetne nejvetsi databaze orig souboru . upravy chip, Fap, klapky, egr, zavady , start stop, CAR-TRUCK-TRACTOR
https://www.facebook.com/pages/Moravia-tuning-chiptuning/152779668154082
Zobrazit informace o autorovi Odeslat soukromou zprávu Odeslat e-mail Zobrazit autorovy WWW stránky ICQ
 
Přidat nové téma   Zaslat odpověď
Strana 1 z 1    
Časy uváděny v GMT + 1 hodina
Právě je ne květen 25, 2025 17:39 pm
Nemůžete odesílat nové téma do tohoto fóra.
Nemůžete odpovídat na témata v tomto fóru.
Nemůžete upravovat své příspěvky v tomto fóru.
Nemůžete mazat své příspěvky v tomto fóru.
Nemůžete hlasovat v tomto fóru.
Můžeš k příspěvkům připojovat soubory
Můžeš stahovat a prohlížet přiložené soubory
 
    DIESELPOWER s.r.o.   Motordiag.cz   Checksumm.com   LogView prohlížeč logů   DIESELPOWER forum  
TOPlist
Copyright (c) 2007 CHECKSUM.CZ. Vsechna prava vyhrazena.