Zkousel uz nekdo uzamcene EDC17 v Boot mode cist IROM a XROM?
Pripadne na co se pripravit...
Tricore EDC17
co jsem se ptal, nikdo nezkousel 17 na stole...anydraj: no pokial viem CMD toto podporuje s novým prídavným modulom BOOT za 2600eur a bude distribuovaný v Decembri.
BOSCH MEDC17 TRICORE IROM/XROM BOOT-MODE WITH LOCKED MICROPROCESSOR
This new CMDFlash extension allow you to tune IROM and XROM of the new Bosch EDC17 and MED17 ECUs with locked Tricore microprocessor.
The product is based on a new additional interface to be connected to the CMDFlash unit.
We developed this new interface in order to give to the user the same friendly operative mode like BDM,
For all the EDC17 ECUs with the Bosch pads on the board ( like the old EDC16 BDM ) you just need the new provided EDC17 positioning frame probe, and no more extra-wiring will be required on the front ECU connectors.
No diodes or boot resistors are required. Everything is managed by the new CMD Boot interface.
Power supplied through the CMDFlash interface, no additional table power supply is required.
Supported ECUs since now:
EDC17CP09 BMW (x30D)
EDC17CP02 BMW (120D/123D)
EDC17CP01 MERCEDES (G320 / E350)
EDC17CP10 MERCEDES (Sprinter)
MED17 MINI/PSA
EDC17CP11 LANDROVER/JAGUAR ( TDV6 )
EDC17CP14 VAG
EDC17CP20 VAG
EDC17CP24 VAG
EDC17U0x VAG
MED17.x VAG
EDC17CP22 VOLVO
EDC17CP14 KIA/HYUNDAI ( Sorento )
EDC17C08 KIA/HYUNDAI ( Soul )
EDC17C19 OPEL ( Insignia )
EDC17CP07 TOYOTA ( IQ )
MED17 FIAT-ALFA-LANCIA
Don't use 3rd parts checksums, Full RSA checksum correction for all the cars is included in the plugin.
Many ECUs have IROM or XROM or IROM+XROM configuration.
The CMDFlash software automatically read all the ECU contents and saves it for backup in a special folder, in the meantime it extracts only the calibration data area, allowing you to save and tune it, so you don't have to search calibration data in IROM and/or XROM, CMDFlash will do it for you. The same for the writing.
The CMDflash boot Kit includes:
-CMD Boot interface + flat cable.
-MPC004 EDC17 positioning frame probe, the probe is compatible with most of the positioning frames present on the market.
-Mercedes EDC17 cable
-Universal boot cable
-CMDFlash Power supply
-CMDFlash Protected MEDC17 Boot-Mode Plugin
-RSA checksums for all the ECU
Prices:
Master CMDflash boot Kit 2600,00 Eur
Slave CMDflash boot Kit 1600,00 Eur
Delivery starts on the first of December.
BOSCH MEDC17 TRICORE IROM/XROM BOOT-MODE WITH LOCKED MICROPROCESSOR
This new CMDFlash extension allow you to tune IROM and XROM of the new Bosch EDC17 and MED17 ECUs with locked Tricore microprocessor.
The product is based on a new additional interface to be connected to the CMDFlash unit.
We developed this new interface in order to give to the user the same friendly operative mode like BDM,
For all the EDC17 ECUs with the Bosch pads on the board ( like the old EDC16 BDM ) you just need the new provided EDC17 positioning frame probe, and no more extra-wiring will be required on the front ECU connectors.
No diodes or boot resistors are required. Everything is managed by the new CMD Boot interface.
Power supplied through the CMDFlash interface, no additional table power supply is required.
Supported ECUs since now:
EDC17CP09 BMW (x30D)
EDC17CP02 BMW (120D/123D)
EDC17CP01 MERCEDES (G320 / E350)
EDC17CP10 MERCEDES (Sprinter)
MED17 MINI/PSA
EDC17CP11 LANDROVER/JAGUAR ( TDV6 )
EDC17CP14 VAG
EDC17CP20 VAG
EDC17CP24 VAG
EDC17U0x VAG
MED17.x VAG
EDC17CP22 VOLVO
EDC17CP14 KIA/HYUNDAI ( Sorento )
EDC17C08 KIA/HYUNDAI ( Soul )
EDC17C19 OPEL ( Insignia )
EDC17CP07 TOYOTA ( IQ )
MED17 FIAT-ALFA-LANCIA
Don't use 3rd parts checksums, Full RSA checksum correction for all the cars is included in the plugin.
Many ECUs have IROM or XROM or IROM+XROM configuration.
The CMDFlash software automatically read all the ECU contents and saves it for backup in a special folder, in the meantime it extracts only the calibration data area, allowing you to save and tune it, so you don't have to search calibration data in IROM and/or XROM, CMDFlash will do it for you. The same for the writing.
The CMDflash boot Kit includes:
-CMD Boot interface + flat cable.
-MPC004 EDC17 positioning frame probe, the probe is compatible with most of the positioning frames present on the market.
-Mercedes EDC17 cable
-Universal boot cable
-CMDFlash Power supply
-CMDFlash Protected MEDC17 Boot-Mode Plugin
-RSA checksums for all the ECU
Prices:
Master CMDflash boot Kit 2600,00 Eur
Slave CMDflash boot Kit 1600,00 Eur
Delivery starts on the first of December.
T5 2010
Taky EDC17 a s Gallettem uplne bez problemu. Dokonce jsem tady nekde cetl na foru ze nekdo zapsal pasika po kabelu ze jen odklepl upozorneni na antituning 
NEW Galletto, MB Star 2010, VAG, Beeprog2, BDM, Bosch KTS.